Product List

Product Type Description Typical Properties Benefits
WANNATE®HTBL-275MS

TDSMSDS

HDI Trimer

HTBL-275MS is a 3,5-dimethylpyrazole blocked aliph...

More
HTBL-275MS is a 3,5-dimethylpyrazole blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 17% solvent naphtha 100 and 8% propylene glycol monomethyl ether acetate, colorless to slightly yellowish clear liquid.

Blocked NCO content:~10.9% Colour Value(Hazen):&l...

More
Blocked NCO content:~10.9%
Colour Value(Hazen):≤ 100
Density (20 ℃):~1.10 g/cm3
Viscosity (25 ℃):2500~4500 mPa.s

Compared with polyisocyanates blocked with butanon...

More
Compared with polyisocyanates blocked with butanone oxime, Wannate® HTBL-275MS allows a reduction in the stoving temperature of approx. 10 °C, with no decrease in solvent and chemical resistance.
WANNATE®HTBL-175S

TDSMSDS

HDI Trimer

HTBL-175S is a MEKO blocked aliphatic polyisocyana...

More
HTBL-175S is a MEKO blocked aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI) and dissolved in 25% Solvent naphtha 100, colorless to slightly yellowish clear liquid.

Blocked NCO content:~11.1% Colour Value(Hazen):&l...

More
Blocked NCO content:~11.1%
Colour Value(Hazen):≤ 60 
Density (20 ℃):~1.06 g/cm3
HDI Monomer:≤ 0.2 
Viscosity (25 ℃):2500~4000 mPa.s

Wannate® HTBL-175S can be used as the hardener...

More
Wannate® HTBL-175S can be used as the hardener in colorfast and weather-stable, one-component polyurethane coatings. The stoving temperature can be significantly reduced by the addition of a catalyst, e.g. dibutyltin dilaurate (DBTL), without reducing the storage stability.
WANNATE®IPDI

TDSMSDS

IPDI

WANNATE®IPDI (3-isocyanatomethyl-3,5,5-trimeth...

More
WANNATE®IPDI (3-isocyanatomethyl-3,5,5-trimethylcyclohexyl isocyanate) is a low odor, low viscosity liquid cycloaliphatic diisocyanate.

Purity:≥ 99.5% NCO content:≥37.5 Colour (A...

More
Purity:≥ 99.5%
NCO content:≥37.5
Colour (APHA):≤ 30 
Ignition temperature:430 ℃
Density (20 ℃):~1.06 g/cm3
Flash point (closed cup):~155 ℃
Viscosity (25 ℃):~10 mPa.s

1. good light stability and weather resistance 2....

More
1. good light stability and weather resistance
2. good mechanical properties and chemical resistance.
3.easy to design molecular structure with specific properties
WANNATE®6860TH

TDSMSDS

Modified Isocyannate

WANNATE® 6860TH is a TDI/HDI trimer. It can be...

More
WANNATE® 6860TH is a TDI/HDI trimer. It can be mainly used in the hardener component for fast drying, two-component polyurethane coating. 

please contact with Wanhua Chemical(Beijing)Co., L...

More
please contact with Wanhua Chemical(Beijing)Co., Ltd.to get more information about production.Tel.:400-6800126

Fast drying.           &n...

More
Fast drying.                            
Good lightfastness.
Low free TDI%. 
WANNATE®6856F

TDSMSDS

Modified Isocyannate

WANNATE® 6856F is a TDI trimer. It can be main...

More
WANNATE® 6856F is a TDI trimer. It can be mainly used in the hardener component for fast drying, two-component polyurethane coating  in conjunction with WANNATE® 6875L. 

please contact with Wanhua Chemical(Beijing)Co., L...

More
please contact with Wanhua Chemical(Beijing)Co., Ltd.to get more information about production.Tel.:400-6800126

Best compatibility.   High gloss. Low free ...

More
Best compatibility.  
High gloss.
Low free TDI%.
WANNATE®6855F

TDSMSDS

Modified Isocyannate

WANNATE® 6855F is a TDI trimer. It can be main...

More
WANNATE® 6855F is a TDI trimer. It can be mainly used in the hardener component for fast drying, two-component polyurethane coating  in conjunction with WANNATE® 6875L.  

please contact with Wanhua Chemical(Beijing)Co., L...

More
please contact with Wanhua Chemical(Beijing)Co., Ltd.to get more information about production.Tel.:400-6800126

Fast drying.           &n...

More
Fast drying.                            
Good compatibility.
Low free TDI%.
WANNATE®6851F

TDSMSDS

Modified Isocyannate

WANNATE® 6851F is a TDI trimer. It can be main...

More
WANNATE® 6851F is a TDI trimer. It can be mainly used in the hardener component for fast drying, two-component polyurethane coating  in conjunction with WANNATE® 6875.

please contact with Wanhua Chemical(Beijing)Co., L...

More
please contact with Wanhua Chemical(Beijing)Co., Ltd.to get more information about production.Tel.:400-6800126

Fast drying.           &n...

More
Fast drying.                            
Good compatibility. 
WANNATE®6878B

TDSMSDS

Modified Isocyannate

WANNATE® 6878B is one type of general-type har...

More
WANNATE® 6878B is one type of general-type hardeners of coatings or adhesives, which is based on TDI and TMP. It can be mainly used to formulate the two-component polyurethane coatings or adhesives with alkyd resin or other substances containing hydroxyl group, applied to high-grade wood paints.

please contact with Wanhua Chemical(Beijing)Co., L...

More
please contact with Wanhua Chemical(Beijing)Co., Ltd.to get more information about production.Tel.:400-6800126

Good compatibility.         &n...

More
Good compatibility.                  
High gloss and transparency.                
Good leveling.
WANNATE®6877L

TDSMSDS

Modified Isocyannate

WANNATE® 6877L is one type of general-type har...

More
WANNATE® 6877L is one type of general-type hardeners of coatings or adhesives , which is based  on TDI and TMP. The free TDI monomer of WANNATE® 6877L  is less than 0.5%.It can be mainly used to formulate the two-component polyurethane coatings or adhesives with alkyd resin or other substances containing hydroxyl group, applied to high-grade wood paints and adhesives.

please contact with Wanhua Chemical(Beijing)Co., L...

More
please contact with Wanhua Chemical(Beijing)Co., Ltd.to get more information about production.Tel.:400-6800126

Fast drying.           &n...

More
Fast drying.                          
High hardness and easy polishing.  
Low free TDI%.
WANNATE®6875L

TDSMSDS

Modified Isocyannate

WANNATE® 6875L is one type of general-type har...

More
WANNATE® 6875L is one type of general-type hardeners of coatings or adhesives , which is based  on TDI and TMP. The free TDI monomer of WANNATE® 6875L  is less than 0.5%.It can be mainly used to formulate the two-component polyurethane coatings or adhesives with alkyd resin or other substances containing hydroxyl group, applied to high-grade wood paints and adhesives.

please contact with Wanhua Chemical(Beijing)Co., L...

More
please contact with Wanhua Chemical(Beijing)Co., Ltd.to get more information about production.Tel.:400-6800126

Good compatibility.         &n...

More
Good compatibility.                  
High gloss and transparency.                
Low free TDI%.
WANNATE®6087

TDSMSDS

Modified Isocyannate

WANNATE® 6087 is single component, solventless...

More
WANNATE® 6087 is single component, solventless, moisture-cured PU adhesive. It is uesd for general fabric/fabric, fabric/membrane and foam composite.

please contact with Wanhua Chemical(Beijing)Co., L...

More
please contact with Wanhua Chemical(Beijing)Co., Ltd.to get more information about production.Tel.:400-6800126

Good initial adhesive ability.      ...

More
Good initial adhesive ability.                    
Well water proof.                
High temperature resistant.    
Good wetting ability to membrane and coating processing performance.
WANNATE®MDI-100F

TDSMSDS

Monomeric MDI

WANNATE®MDI-100F is pure MDI.It is a white or ...

More
WANNATE®MDI-100F is pure MDI.It is a white or pale yellow solid at room temperatures.
When melted, it becomes a colorless to pale yellow liquid.

MDI Purity,%   ≥99.6% Colour, APHA ≤30...

More
MDI Purity,%   ≥99.6%
Colour, APHA ≤30
Hydrolysable Chlorine,% ≤0.003
Cyclohexane Insolubles,% ≤0.2

Freshly manufactured WANNATE®MDI-100F is a cle...

More
Freshly manufactured WANNATE®MDI-100F is a clear liquid when molten.                                                      
Reactive chemical, reaction with atmospheric moisture occurs easily. 
WANNATE®MDI-100A

TDSMSDS

Monomeric MDI

WANNATE®MDI-100A is pure MDI.It is a white or ...

More
WANNATE®MDI-100A is pure MDI.It is a white or pale yellow solid at room temperatures.When melted, it becomes a colorless to pale yellow liquid.

MDI Purity,%   ≥99.6% Colour, APHA ≤30...

More
MDI Purity,%   ≥99.6%
Colour, APHA ≤30
Hydrolysable Chlorine,% ≤0.003
Cyclohexane Insolubles,% ≤0.2

Freshly manufactured WANNATE®MDI-100A is a cle...

More
Freshly manufactured WANNATE®MDI-100A is a clear liquid when molten.                                                      
Reactive chemical, reaction with atmospheric moisture occurs easily. 
WANNATE®HB-75MX

TDSMSDS

HDI Biuret

WANNATE®HB-75MX is an aliphatic diisocyanate b...

More
WANNATE®HB-75MX is an aliphatic diisocyanate based on hexamethylene diisocyanate (HDI),  colorless or pale yellow liquid under normal temperature, the solids content of which is 75%.

NCO content/%:16.5±0.3 Color value(Pt-Co) ...

More
NCO content/%:16.5±0.3
Color value(Pt-Co) ≤ 40
Viscosity(25℃,/mPa•s):225±75
Monomeric HDI/% < 0.5
Solids /%:75 ± 1
Solvent:MPA/X (1:1)

Outstanding gloss and color retention; Excellent ...

More
Outstanding gloss and color retention;
Excellent adhesion to different substrates and favorable flexibility;
Very high chemical resistance.
WANNATE®HB-75B

TDSMSDS

HDI Biuret

WANNATE®HB-75B is an aliphatic diisocyanate ba...

More
WANNATE®HB-75B is an aliphatic diisocyanate based on hexamethylene diisocyanate (HDI),  colorless or pale yellow liquid under normal temperature, the solids content of which is 75%.

NCO content/%:16.5±0.3 Color value(Pt-Co) ...

More
NCO content/%:16.5±0.3
Color value(Pt-Co) ≤ 40
Viscosity(25℃,/mPa•s):150±50
Monomeric HDI/% < 0.5
Solids /%:75 ± 1
Solvent:butyl acetate(BA)

Outstanding gloss and color retention; Excellent ...

More
Outstanding gloss and color retention;
Excellent adhesion to different substrates and favorable flexibility;
Very high chemical resistance.
WANNATE®HT-790B

TDSMSDS

HDI Trimer

WANNATE®HT-790B is an aliphatic polyisocyanate...

More
WANNATE®HT-790B is an aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid, the solids content of which is 90%.

NCO content / %:17.8±0.5 Color value(Pt-Co...

More
NCO content / %:17.8±0.5
Color value(Pt-Co): ≤40
Viscosity (25 ℃)/mPa•s:1800±700
Monomeric HDI /%: ≤0.30
Solids /%:90±1
Solvent: butyl acetate(BA)

Aliphatic structure without chromogenic groups: O...

More
Aliphatic structure without chromogenic groups:
Outstanding weathering resistance, excellent gloss and color retention ability.
Stable molecular structure:
Excellent mechanical performance and chemical resistance.
Favorable intermolecular forces:
Good dilution stability, low viscosity, easy to apply.
WANNATE®HT-600

TDSMSDS

HDI Trimer

WANNATE®HT-600 is a low viscosity solvent-free...

More
WANNATE®HT-600 is a low viscosity solvent-free polyfunctional aliphatic polyisocyanate based on hexamethylene diisocyanate (HDI), colorless to slightly yellowish clear liquid, the solids content of which is 100%.

NCO content / %:23.0±0.5 Color value(Pt-Co...

More
NCO content / %:23.0±0.5
Color value(Pt-Co): ≤40
Viscosity (25 ℃)/mPa•s:1200±300
Monomeric HDI /%: ≤0.25
Solids /%:100

Aliphatic structure without chromogenic groups: O...

More
Aliphatic structure without chromogenic groups:
Outstanding weathering resistance, excellent gloss and color retention ability.
Stable molecular structure:
Excellent mechanical performance and chemical resistance.
Favorable intermolecular forces:
Good dilution stability, low viscosity, easy to apply.
WANNATE®HB-100

TDSMSDS

HDI Biuret

WANNATE®HB-100 is an aliphatic diisocyanate ba...

More
WANNATE®HB-100 is an aliphatic diisocyanate based on hexamethylene diisocyanate (HDI),  colorless or pale yellow liquid under normal temperature, the solids content of which is 100%.

NCO content/%:22.0±0.3 Color value(Pt-Co) ...

More
NCO content/%:22.0±0.3
Color value(Pt-Co) ≤ 80
Viscosity(25℃,/mPa•s):9000±2000
Monomeric HDI/% ≤ 0.70

Outstanding gloss and color retention; Excellent ...

More
Outstanding gloss and color retention;
Excellent adhesion to different substrates and favorable flexibility;
Very high chemical resistance.
WANNATE®80691

TDSMSDS

Modified Isocyannate

WANNATE®80691 a modified MDI,suitable for maki...

More
WANNATE®80691 a modified MDI,suitable for making fiber reinforced composite.

please contact with Wanhua Chemical(Beijing)Co., L...

More
please contact with Wanhua Chemical(Beijing)Co., Ltd.to get more information about production.Tel.:400-6800126

Slow creaming; Fast curing; Effective demolding....

More
Slow creaming;
Fast curing;
Effective demolding.
WANNATE®8021

TDSMSDS

Modified Isocyannate

WANNATE®8021 is a mixture of polyol-modified d...

More
WANNATE®8021 is a mixture of polyol-modified diphenylmethane diisocyanate and polyphenylmethane polyisocyanate.

please contact with Wanhua Chemical(Beijing)Co., L...

More
please contact with Wanhua Chemical(Beijing)Co., Ltd.to get more information about production.Tel.:400-6800126

Lower viscosity;   Rebounded foam with highe...

More
Lower viscosity;  
Rebounded foam with higher hardness.